Bran grinder machine consists of three parts: the main machine, the auxiliary machine and the electric control box. It has various properties such as air-selection, no screen, no net, uniform particle size and so on. The production process is continuous. The rice straw vacuum grinding has reached the international advanced level and is widely used in the crushing of materials in the pharmaceutical, source, food and other industries.
The Bran Grinder Machine is a high-efficiency micro-grinder designed and developed by our company. The crushing of materials and the classification of powder particles are installed in the same body, and they operate independently. The grain and grain micro-powder machine has the functions of full function, compact structure, stable technical performance, low power consumption, wide adaptability, no dust generation, adjustable powder fineness (60-500 mesh), simple maintenance, etc., widely adapted to energy, Dye, paint, medicine, food and other industries in different fields * super fine crushing, material crushing, classification * finished products are carried out in the same closed system, dust removal treatment, no pollution, is the current environmental protection ideal complete sets of equipment maintenance
1. During the production process, the bearing temperature rise should be checked frequently. When the temperature rise exceeds 50 °C, stop the inspection, find out the cause, and eliminate the fault.
2. When the new machine is running, the transmission belt is easy to be long. It is necessary to adjust the proper plate tightness of the belt to ensure the working life of the belt.
3. Consumable parts should be inspected frequently and replaced in time to ensure production volume.
4. Blades, liners should always check the wear and tear, such as wear, productivity is reduced, the particle size becomes thicker, and it is found to be replaced immediately after wear.
5. The main machine and graded rolling bearings are greased, using 2 # white special grease (Q / SY-5-79), penetration 265-295.
6. The grease replacement period of the bearing is 2000 hours. The filling of the grease is the upper space of the bearing cavity (upper side) or 3/4 (lower side). Do not fill the grease too much, otherwise the bearing temperature will be too high.
7. The screw feeder lubricates the bearing without adding grease, but it should be cleaned regularly.
1. Compact structure, small size, light weight and convenient movement.
2. The Bran Grinder Machine is equipped with an overload protection device, which can avoid the malfunction of the card machine that occurs when there is too much discharging.
3. The body is fully mining steel material, durable.
Speed (rev / min)
Number of blades
Degree of fineness
Feed particle size(mm)
Material moisture content
Note: The yield depends on the fineness of the finished material.